ACT® Feeder Chambers
An ACT® coated feeder chamber used in the crystal industry.

ACT® Feeder Chambers
The same chamber waiting to be coated. The quality of the substrate is important to obtain a good quality coating. Please refer to our quality specifications in the document section.

ACT® Feeder Chambers
Three feeder chambers waiting to be coated. A list of the substrates that we recommend for coating is available in the document section.

ACT® Feeder Chambers
A section through an ACT® platinum coated ceramic feeder system after its removal from operation. The internal geometry of the part has been completely maintained. The elimination of corrosion of the ceramic leads to drastic improvements in the quality of the lead crystal produced.

ACT® Feeder Chambers
This picture demonstrates our extensive experience with ACT® Coating and the size of our repeat orders.

ACT® Feeder Chambers - Power Coating™
Power Coating™ can be used in a large variety of applications including feeder systems. LCD refiner systems, heated channels, glass delivery systems and spout bowls.

ACT® Feeder Chambers - Power Coating™
Thermal images of a Power Coating™ ACT® Coated Chamber. The heat delivered through the coating is uniform.

ACT® Feeder Chambers - Power Coating™
Thermal images of a Power Coating™ ACT® Coated Chamber. Power Coating™ in combination with ACT® Coating is a clever solution for direct heating. To find out more, please visit our document section on the right hand side.

ACT® Feeder Chambers - Power Coating™
In operation, this Power Coating™ feeder system is able to maintain the temperature to within +/-0.5ºC at around 1200ºC and control the gob weight to within +/-0.2%.

ACT® Feeder Chambers - Power Coating™
The first Power Coating™ feeder system was installed at Crystalex in the Czech Republic in March 2001. It was operating well above expectations and required less than half the precious metal than the fabricated direct-heated system it replaced.