PGM Fabrications
Typical fabrication materials and purities are: Platinum99.9%, ZGS Platinum, 5% Rhodium/Platinum 99.9%, 10% Rhodium/Platinum99.9%, ZGS 10% Rhodium/Platinum, 20% Rhodium/Platinum99.9%.
ZGS = Zirconia Grain Stabilised - see ZGS datasheet for details.

PGM Fabrications
Our operators are highly skilled and trained to TIG (tungsten inert gas) weld platinum alloy sheet from 0.35 mm to 10.00 mm thick, achieving full penetration with the minimum of distortion.

PGM Feeder
A picture of a feeder used in the glass industry. It is made of a platinum/rhodium alloy.

PGM Cover (Crucible)
The lid of a platinum rhodium alloy crucible. Welds are dressed to be either visible or non-visible, depending on your requirements.

Cladded spout bowl
The orifice of a cladded spout bowl. Our experienced operators are skilled at fabricating parts that fit exactly the substrate they have to protect.

Direct heated PGM feeder
A picture of a feeder used in the glass industry. It is made of a platinum rhodium alloy.

Direct heated PGM feeder
Typical fabrication materials and purities are: Platinum99.9%, ZGS Platinum, 5% Rhodium/Platinum 99.9%, 10% Rhodium/Platinum99.9%, ZGS 10% Rhodium/Platinum, 20% Rhodium/Platinum99.9%.
ZGS = Zirconia Grain Stabilised - see ZGS datasheet for details.

Direct heated PGM feeder
Our operators are highly skilled and trained to TIG (tungsten inert gas) weld platinum alloy sheet from 0.35 mm to 10.00 mm thick, achieving full penetration with the minimum of distortion.

PGM Crucible
A picture of a crucible used in the glass industry. It is made of a platinum/rhodium alloy.

PGM Crucible
Typical fabrication materials and purities are: Platinum99.9%, ZGS Platinum, 5% Rhodium/Platinum 99.9%, 10% Rhodium/Platinum99.9%, ZGS 10% Rhodium/Platinum, 20% Rhodium/Platinum99.9%.
ZGS = Zirconia Grain Stabilised - see ZGS datasheet for details.

PGM Crucible
Our operators are highly skilled and trained to TIG (tungsten inert gas) weld platinum alloy sheet from 0.35 mm to 10.00 mm thick, achieving full penetration with the minimum of distortion.

PGM Crucible
A picture of a feeder used in the glass industry. It is made of a platinum/rhodium alloy. Welds are dressed to be either visible or non-visible depending on your requirements.

PGM Tube
A picture of a tube used in the glass industry. It is made of a platinum/rhodium alloy.

PGM Tube
Our operators are highly skilled and trained to TIG (tungsten inert gas) weld platinum alloy sheet from 0.35 mm to 10.00 mm thick, achieving full penetration with the minimum of distortion.